CP TECHNOLOGIES 4 CH Digital Video System Manual de usuario

272Z C CPD560A_560AS_561ASV_Manual_V1.2 44CCHH MMPPEEGG44 DDVVRR USER MANUAL Please read

FRONT AND REAR PANELS -6- 4) CALL Connect to CALL monitor to show the channel display one by one. When any alarm is triggered, CALL monitor will sho

CONNECTIONS AND SETUP -7- 3. CONNECTIONS AND SETUP 3.1 HDD Installation (Take Model 1 as an example) The HDD must be installed before the DVR is turne

CONNECTIONS AND SETUP -8- 3.2 Camera Connection The cameras must be connected and power-supplied BEFORE the DVR is turned on. The DVR will automatical

CONNECTIONS AND SETUP -9- activated in the DVR menu (The default setting is on). Please refer to the following figure as an example. 3.3.3 Speed Dome

CONNECTIONS AND SETUP -10- solder side of the 15 PIN or 25 PIN D-Sub connector (as shown in the picture above). STEP 5: Set the speed dome camera at t

CONNECTIONS AND SETUP -11- ADVANCE SYSTEM CAMERA SERIAL TYPE RS485 DETECTION BAUDRATE 2400 REMOTE HOST ID 0 DISPLAY PASSWORD XXXX ALERT RESET DEFA

BASIC OPERATION -12- 4. BASIC OPERATION 4.1 Live Page In this live page of the DVR, you can see the following icons: Icon Function Icon Function Icon

BASIC OPERATION -13- 2) Pause / Image Jog Press “PAUSE” button to pause the playback. In the pause mode: Press “►” button once to get one frame forwa

BASIC OPERATION -14- Step 5. Click “Update Firmware” or “Update Language” button to start the upgrade. Note: For remote upgrade details, please see “T

MAIN MENU -15- 5. MENU CONFIGURATION DATE QUICK SEARCH SEARCH HDD IMAGE SIZE QUALITY MANUAL RECORD ENABLE EVENT REOCRD ENABLE TIMER RECORD ENABLE MANU

IMPORTANT SAFEGUARD Graphic Symbol Explanation The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the

MAIN MENU -16- UPGRADE AUTO KEYLOCK (SEC) LANGUAGE VIDEO FORMAT VERSION NETWORK TYPE IP GATEWAY NETMASK PRIMARY DNS SECONDARY DNS NETWORK PORT START

QUICK START MENU -17- 6. QUICK START MENU Press the “MENU” button and enter the password to go to the quick-start menu list. The default admin passwor

QUICK START MENU -18- RECORD IMAGE SIZE FRAME MENU QUALITY BEST QUICK SEARCH MANUAL RECORD ENABLE ON RECORD EVENT RECORD ENABLE ON TIMER TIMER

ADVANCED MENU ~19~ 6.2 TIMER Press “MENU” button on the front panel to enter the main menu list. Move to “TIMER”, and press ”ENTER”. Select to enable

ADVANCED MENU ~20~ 7. ADVANCED MENU Press “MENU” button on the front panel to enter the main menu list. Move to “ADVANCE”, and press ”ENTER”. The scre

ADVANCED MENU ~21~ 7.2 DETECTION In this submenu, you can set up detection-related functions: DETECTION SETUP and DETECTION TIMER. Move to “DETECTION”

ADVANCED MENU ~22~ 4) LS (Level of Sensitivity) “LS” is to set the sensitivity of comparing two different images. The smaller the value is, the high

ADVANCED MENU ~23~ 5) RATE Set the baud rate of each channel (2400 / 4800 / 9600 / 19200 / 57600 / 115200). For the connected cameras, such as PTZ and

ADVANCED MENU ~24~ The submenu items are described below: 1) EXT. ALERT Select to enable or disable the sound when any external alarm is triggered (ON

ADVANCED MENU ~25~ 2) BAUDRATE Press “UP” / “DOWN” to set the baud rate of the DVR (2400 / 9600 / 19200 / 57600 / 115200). 3) HOST ID Press “UP” / “DO

TABLE OF CONTENTS 1. OVERVIEW...

ADVANCED MENU ~26~ The submenu items are described below: ‧ STATIC 1) NETWORK TYPE Select the network type as STATIC and set all the information need

ADVANCED MENU ~27~ Note: The PPPOE function needs to have one “username” and one “password” subscribed from one ISP supplier, and a “DDNS account” to

ADVANCED MENU ~28~ 1) USB BACKUP Before making USB backup, please check if: a) The USB flash drive is supported by your DVR. If not, the message “U

ADVANCED MENU ~29~ 7.9 HDD INFO In this menu list, you can view the remaining capacity of all the connected HDDs in this device. Move to “HDD INFO”,

ADVANCED MENU ~30~ 7.11 EVENT LOG In this menu list, you can view all the event information (event type, time and channel) or clear all log records.

REMOTE OPERATION ~31~ 8. REMOTE OPERATION You can also control the DVR remotely via the supplied licensed software AP (hereafter called the “AP”), IE

REMOTE OPERATION ~32~ “Event” panel will be shown by defaults.  RReemmoottee CCoonnnneeccttiioonn ((vviiaa IInntteerrnneett)) a) Double-click “

REMOTE OPERATION ~33~ If “Manual” is checked, click “ ” (Record) on the main control panel to start the manual recording immediately, and the recordin

REMOTE OPERATION ~34~ Network Backup Click “ ” (Miscellaneous Control) → “ ” (Backup) to go into the “Download” page as follows, and you can select a

REMOTE OPERATION ~35~ Button Function Description DVR Control Click to go to the DVR control panel to operate the DVR remotely. For details, please s

7.11 EVENT LOG...

REMOTE OPERATION ~36~ REC When the AP is connected to more than 1 device, and not all devices are necessary to enable the manual record function, chec

REMOTE OPERATION ~37~ Choose the desired channel from the drop-down list, and click and drag the slider to make adjustment. Click “” to apply the cha

REMOTE OPERATION ~38~ Function Description To simply backup images without previewing, deselect the checkbox “Simultaneous Playback”. You will only se

REMOTE OPERATION ~39~ 3rd timeline -- Motion record, indicated in cyan. Click and hold the start time point, and drag to the end time point to set the

REMOTE OPERATION ~40~ General In “General” and its sub-menus, “Log”, “Account” and “OnLineUser”, you can view and set some common settings, such as th

REMOTE OPERATION ~41~ Column Description User Name Set a user name that will be used for remote login. The user name allows up to 10 characters. Pas

REMOTE OPERATION ~42~ Select the network type you will be using for DVR connection. There are 3 network connection types: Static IP, PPPOE and DHCP.

REMOTE OPERATION ~43~ E-mail was not received within an hour, request “password reset” (http://www.dyndns.org/account/resetpass/). d). Use the DDNS us

REMOTE OPERATION ~44~ Function Description Server Enter the SMTP server address provided from your e-mail system supplier. Mail From Enter the entir

REMOTE OPERATION ~45~ Function Description Serial Port Type Display the serial type (RS485) used by this DVR. It’s automatically detected. Baud Rate S

OVERVIEW -1- 1. OVERVIEW 1.1 Product Description This MPEG4 multiplex network DVR series combines remote surveillance, burglar prevention, and evident

REMOTE OPERATION ~46~ Please see the description below for each function: Function Description DETECT Enable (ON) or disable (OFF) the function of “M

REMOTE OPERATION ~47~ ‧ Permit Select this checkbox to allow the record timer setting to be applied to the connected DVR. If this checkbox is deselec

REMOTE OPERATION ~48~ Function Description Title Select to display the channel title in the live view. Event Select to display the event symbol in t

REMOTE OPERATION ~49~ a). Get the language files you want to update from your distributor. b) Click “Add” to locate and select the files needed. The

REMOTE OPERATION ~50~  SSttaattuuss LLiisstt Click “ ” to view all the event and record logs, or search for the specific log(s) by date or by re

REMOTE OPERATION ~51~ NO. Function Description 1 Playback / Download Info Display This area shows the detailed playback / download information, such

REMOTE OPERATION ~52~ NO. Function Description 1 Click the channel No. (CH1 ~ CH16) to see the live view of the selected channel. Click the view mode

REMOTE OPERATION ~53~ 8.2 IE Web Browser You can view the live images only via IE web browser. Note: The supported PC operation systems are Windows

REMOTE OPERATION ~54~ Function Description Search Press to enter the DVR full search menu. You can check all the logs here, and select one of them

REMOTE OPERATION ~55~ 8.3 QuickTime Player You can also use the QuickTime player to remotely log into the DVR and check the live view only. Note: Qui

OVERVIEW -2- 1.3 Specifications MODEL CPD560A CPD560AS CPD561ASVVideo System NTSC / PAL (auto detectio

APPENDIX 1 COMPATIBLE USB FLASH DRIVE BRAND ~56~ APPENDIX 1 PIN CONFIGURATION PIN FUNCTION DESCRIPTION 1 PIN OFF 2 PIN OFF 3 ~ 6 ALARM INPUT To

APPENDIX 2 COMPATIBLE USB FLASH DRIVE BRAND ~57~ APPENDIX 2 COMPATIBLE USB FLASH DRIVE BRAND Please upgrade the firmware of the DVR to the latest vers

APPENDIX 3 COMPATIBLE HDD BRAND ~58~ APPENDIX 3 COMPATIBLE HDD BRAND Please upgrade the firmware of the DVR to the latest version to ensure the accura

APPENDIX 3 COMPATIBLE HDD BRAND ~59~ ‧ For IDE HDD MANUFACTURER MODEL CAPACITY ROTATION Deskstar 7K250, HDS722516VLAT20 160GB 7200 rpm HDS722516

APPENDIX 4 TROUBLESHOOTING ~60~ APPENDIX 4 TROUBLESHOOTING Please refer to the table below for easy troubleshooting. The table describes some typical

APPENDIX 5 RS485 PROTOCOL ~61~ APPENDIX 5 RS485 PROTOCOL  Use PC keyboards to simulate DVR keypads.  Data: REMOTE PROTOCOL uses 8 bit data, 1 start

FRONT AND REAR PANELS -3- 2. FRONT AND REAR PANELS 2.1 Front Panel 1) LED Indication The following LEDs will be on when: HDD: HDD is reading or record

FRONT AND REAR PANELS -4- 12) or PLAY Press this button to play the recorded video. 13) Pause / Stop / Rew / FF Under the playback mode: Press one

FRONT AND REAR PANELS -5- 2.2 Rear Panel ‧ Model 1 & 2 ‧ Model 3 ‧ Model 4 ‧ Model 5 1) 75Ω / HI-IMPEDANCE When using LOOP function, pleas