CP TECHNOLOGIES 4 CH Digital Video System Manual de usuario descargar pdf (Pagina 50)

REMOTE OPERATION

~46~

Please see the description below for each function:

Function Description

DETECT Enable (ON) or disable (OFF) the function of “Motion Detection”.

If this function is enabled, you might need to set the motion detection sensitivity or simply keep the

default values. For details, please see the description below.

Motion Detection

Sensitivity

(LS / SS / TS / RE)

Set the detection sensitivity in 4 different adjustable parameters (LS / SS / TS / RE).

For details about each parameter, please refer to”7.2 DETECTION” at page 21.

Alarm Select N.C. (normal closed) / N.O. (normal opened) / OFF for the alarm polarity. For N.C. / N.O.

contact details, please refer to “APPENDIX 1 PIN CONFIGURATION” at page 56.

Motion Detection

Setting Area

Set the motion detection area by selecting the area grids with your mouse. Pink grids represent

the area that is not being detected while the transparent grids are the area under detection. You

can set multiple areas under detection.

Click “－” (Clear All) to set the whole area undetected.

Click “＋” (Select All) to set the whole area under detection.

Apply / Return To save the setting, click “Apply” and return to “Server Setting” window.

To discard the setting, click “Return” to directly return to “Server Setting” window without saving.

 Record

In “Dvr” → “Record”, you will see the following items for DVR record settings.

Function Description

Image Size / Quality Choose the image size (FRAME / FIELD / CIF) and quality (BEST / HIGH / NORMAL / BASIC).

Manual Record / Event

Record / Timer Record

Select the record type that the DVR will take recording (Yes / No), and select the IPS setting for the

selected record type.

Pre-Alarm Record Check this option if you want to enable the pre-alarm recording function.

When an alarm is triggered, the DVR will record 8MB video data before the alarm event is actually

happened.

Overwrite Select “Yes” to enable the HDD overwrite function when the HDD is full, or “No” to disable this

function.

When this function is on, and the recording and the pre-alarm function are activated, the DVR will

overwrite 8GB data from the oldest for continuous recording without notice.

 Record Timer

In this menu list, you can set the record schedule for normal recording or motion recording.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 64 65

Sin comentarios

CP TECHNOLOGIES 4 CH Digital Video System Manual de usuario Pagina 50