
ADVANCED MENU
~23~
5) RATE
Set the baud rate of each channel (2400 / 4800 / 9600 / 19200 / 57600 / 115200). For the connected cameras, such as
PTZ and speed dome cameras, etc., please make sure their baud rate setting is the same as the setting here.
7.4 DISPLAY
In this menu list, you can check and change some display settings.
Move to “DISPLAY”, and press ”ENTER”. You will see a similar screen as the following:
ADVANCE DISPLAY
CAMERA DE-INTERLACE ON
DETECTION FULL SCREEN DWELL DURATION (SEC) 03
REMOTE CHANNEL TITLE ON
DISPLAY EVENT STATUS ON
ALERT DATE DISPLAY ON
SYSTEM VGA OUTPUT (For Model 4 & 5 only) 1024 X 768
NETWORK
BACKUP PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTING
HDD INFO uv SELECT s BACK t NEXT ENTER
EVENT SEARCH
EVENT LOG
The submenu items are described below:
1) DE-INTERLACE
Select to enable or disable “DE-INTERLACE” function (ON / OFF).
2) FULL SCREEN DWELL DURATION (SEC)
Set the full screen dwell duration time (3 / 5 / 10 / 15 seconds).
3) CHANNEL TITLE
Select to display the channel title or not (ON / OFF).
4) EVENT STATUS
Select to display the symbols of the event or not (ON / OFF).
5) DATE DISPLAY
Select to display the date or not (ON / OFF).
6) VGA OUTPUT (For Model 4 & 5 only)
Select the VGA output resolution. There are seven options for your choice:
800 x 600 / 1024 x 768 (default) / 1280 x 1024 / 1440 x 900 / 1400 x 1050 / 1680 x 1050 / 1600 x 1200
7.5 ALERT
In this menu list, you can set alerts for different kinds of situations, such as when HDD is full.
Move to “ALERT”, and press ”ENTER”. You will see a similar screen as the following:
ADVANCE ALERT
CAMERA EXT. ALERT ON
DETECTION INT. BUZZER ON
REMOTE KEY BUZZER ON
DISPLAY VLOSS BUZZER ON
ALERT MOTION BUZZER ON
SYSTEM ALARM BUZZER ON
NETWORK HDD BUZZER ON
BACKUP ALARM DURATION (SEC) 05
HDD INFO HDD NEARLY FULL (GB) 05
EVENT SEARCH
EVENT LOG PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTING
uv SELECT s BACK t NEXT ENTER
Comentarios a estos manuales